You are currently viewing How To Check For Roof Damages: DIY Vs. Professional Help

How To Check For Roof Damages: DIY Vs. Professional Help

The unfortunate reality is that roofs do sometimes need repair – and sometimes, it’s necessary to do the repairs yourself. If you’re considering taking on DIY roof inspection and restoration at your home in Durham, you should be aware of the risks involved. Raleigh Roofers shares some vital information regarding DIY roof repair.

What Can Possibly be wrong with my Roof?

The first step in any roof repair is identifying the problem. A professional roofer will be able to do a complete inspection and tell you what’s wrong with your Roof. If you’re doing it yourself, there are some things you can look for:

  • Are there any missing or broken tiles?
  • Is the flashing around the chimney or vents damaged?
  • Are there any signs of water damage, such as mold or peeling paint?

If you encounter any of these issues, it’s critical to address them immediately. Left untreated, they can lead to further damage – and even worse, a total roof replacement.

DIY Roof Inspection Tips

The next step is to inspect the damage once you’ve determined what needs to be repaired. This might not be easy if you’re not familiar with roofing terminology.

Small Holes and Cracks

You’ll need:

  • Tube of roofing cement,
  • A putty knife,
  • Some roofing nails.

Cement the roofing nails into the hole or crack, then spread roofing cement over the top using the putty knife. Allow it to rest for a day after smoothing it out.

Larger Holes

If the hole is more significant than one inch in diameter, you’ll need to:

  • Replace that section of roofing material.
  • Cut a new piece of asphalt-saturated felt paper to size
  • Remove the shingle above it (if there is one)
  • Apply a coat of roofing cement to the felt paper
  • Place the shingle back in its original position and nail it down.
  • Finally, apply another coat of roofing cement to the top of the shingle.

Shingle Replacement

  • If you have to replace an entire section of shingles, start by prying up the old ones with your putty knife.
  • Remove debris from the area and apply a layer of roofing cement to the plywood sheathing.
  • Replace the shingles one at a time, nailing them into place as you go.
  • Apply a final coat of roofing cement to the top of each shingle.

The risks involved in doing DIY roof repairs are:

Slips and fall: A slippery surface can lead to a fall, which can cause serious injuries.

Injury from Tools: Improper tools can lead to cuts, bruises, or worse.

Electrocution: If you’re working near electrical wiring, there’s a risk of electrocution.

Fire: Roofing materials are flammable, so there’s always a fire risk when repairing your Roof.

Hiring Professional Help has Benefits:

  • They will identify any damages that need repair.
  • They have the equipment and experience to do the job safely and correctly.
  • You may be eligible for a warranty on the work done by professionals.

When it comes to roof repairs, doing it yourself can be risky. It’s crucial to weigh the risks against the benefits of hiring a professional before deciding. For most people, it’s best to leave the job to the pros.

Contact us at Raleigh Roofers if you’re searching for an experienced and dependable roofer in Durham to assist with your roofing needs. You can get a free estimate too.